summaryrefslogtreecommitdiff
path: root/cmake
diff options
context:
space:
mode:
Diffstat (limited to 'cmake')
-rw-r--r--cmake/Modules/CodeCoverage.cmake213
-rw-r--r--cmake/Modules/FindLITESQL.cmake76
2 files changed, 289 insertions, 0 deletions
diff --git a/cmake/Modules/CodeCoverage.cmake b/cmake/Modules/CodeCoverage.cmake
new file mode 100644
index 0000000..4f54327
--- /dev/null
+++ b/cmake/Modules/CodeCoverage.cmake
@@ -0,0 +1,213 @@
+# Copyright (c) 2012 - 2015, Lars Bilke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+# may be used to endorse or promote products derived from this software without
+# specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# USAGE:
+
+# 0. (Mac only) If you use Xcode 5.1 make sure to patch geninfo as described here:
+# http://stackoverflow.com/a/22404544/80480
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt:
+# INCLUDE(CodeCoverage)
+#
+# 3. Set compiler flags to turn off optimization and enable coverage:
+# SET(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+# SET(CMAKE_C_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+#
+# 3. Use the function SETUP_TARGET_FOR_COVERAGE to create a custom make target
+# which runs your test executable and produces a lcov code coverage report:
+# Example:
+# SETUP_TARGET_FOR_COVERAGE(
+# my_coverage_target # Name for custom target.
+# test_driver # Name of the test driver executable that runs the tests.
+# # NOTE! This should always have a ZERO as exit code
+# # otherwise the coverage generation will not complete.
+# coverage # Name of output directory.
+# )
+#
+# 4. Build a Debug build:
+# cmake -DCMAKE_BUILD_TYPE=Debug ..
+# make
+# make my_coverage_target
+#
+#
+
+# Check prereqs
+FIND_PROGRAM( GCOV_PATH gcov )
+FIND_PROGRAM( LCOV_PATH lcov )
+FIND_PROGRAM( GENHTML_PATH genhtml )
+FIND_PROGRAM( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/tests)
+
+# Display an error when the target is called. If no error is found, this
+# function will be overridden by the real one later in this file
+FUNCTION(SETUP_TARGET_FOR_COVERAGE _targetname _testrunner _outputname)
+ ADD_CUSTOM_TARGET(${_targetname}
+ COMMAND echo "Coverage is not available: ${ERROR_MSG}"
+ )
+ENDFUNCTION()
+
+IF(NOT GCOV_PATH)
+ set(ERROR_MSG "gcov not found")
+ return()
+ENDIF()
+MARK_AS_ADVANCED(GCOV_PATH)
+IF(NOT LCOV_PATH)
+ set(ERROR_MSG "lcov not found")
+ return()
+ENDIF()
+MARK_AS_ADVANCED(LCOV_PATH)
+IF(NOT GENHTML_PATH)
+ set(ERROR_MSG "genhtml not found")
+ return()
+ENDIF()
+MARK_AS_ADVANCED(GENHTML_PATH)
+IF(NOT CMAKE_COMPILER_IS_GNUCXX)
+ set(ERROR_MSG "Compiler is not gcc")
+ return()
+ENDIF()
+
+SET(CMAKE_CXX_FLAGS_COVERAGE
+ "-g -O0 --coverage -fprofile-arcs -ftest-coverage"
+ CACHE STRING "Flags used by the C++ compiler during coverage builds."
+ FORCE )
+SET(CMAKE_C_FLAGS_COVERAGE
+ "-g -O0 --coverage -fprofile-arcs -ftest-coverage"
+ CACHE STRING "Flags used by the C compiler during coverage builds."
+ FORCE )
+SET(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+ ""
+ CACHE STRING "Flags used for linking binaries during coverage builds."
+ FORCE )
+SET(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+ ""
+ CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+ FORCE )
+MARK_AS_ADVANCED(
+ CMAKE_CXX_FLAGS_COVERAGE
+ CMAKE_C_FLAGS_COVERAGE
+ CMAKE_EXE_LINKER_FLAGS_COVERAGE
+ CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+IF ( NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR CMAKE_BUILD_TYPE STREQUAL "Coverage"))
+ MESSAGE( WARNING "Code coverage results with an optimized (non-Debug) build may be misleading" )
+ENDIF() # NOT CMAKE_BUILD_TYPE STREQUAL "Debug"
+
+
+# Param _targetname The name of new the custom make target
+# Param _testrunner The name of the target which runs the tests.
+# MUST return ZERO always, even on errors.
+# If not, no coverage report will be created!
+# Param _outputname lcov output is generated as _outputname.info
+# HTML report is generated in _outputname/index.html
+# Optional fifth parameter is passed as arguments to _testrunner
+# Pass them in list form, e.g.: "-j;2" for -j 2
+FUNCTION(SETUP_TARGET_FOR_COVERAGE _targetname _testrunner _outputname)
+
+ # Setup target
+ ADD_CUSTOM_TARGET(${_targetname}
+
+ # Cleanup lcov
+ COMMAND ${LCOV_PATH} --directory . --zerocounters
+
+ # Create baseline coverage data file
+ COMMAND ${LCOV_PATH} -c -i -d . -o ${_outputname}.baseline.info -q
+
+ # Run tests
+ COMMAND ${_testrunner} ${ARGV3}
+
+ # Capturing lcov counters and generating report
+ COMMAND ${LCOV_PATH} --directory . --capture --output-file ${_outputname}.info -q
+ # Combine the baseline and the test data
+ COMMAND ${LCOV_PATH} -a ${_outputname}.info -a ${_outputname}.baseline.info -o ${_outputname}.info -q
+
+ # Remove information about source files that are not part of
+ # the test (system file, external libraries, etc)
+ COMMAND ${LCOV_PATH} --remove ${_outputname}.info 'tests/*' '/usr/*' 'external/*' --output-file ${_outputname}.info.cleaned -q
+
+ # Generate the report
+ COMMAND ${GENHTML_PATH} -o ${_outputname} ${_outputname}.info.cleaned
+
+ # Clean the temporary files we created
+ COMMAND ${CMAKE_COMMAND} -E remove ${_outputname}.info ${_outputname}.info.cleaned
+
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
+ )
+
+ # Show info where to find the report
+ ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD
+ COMMAND ;
+ COMMENT "Open ./${_outputname}/index.html in your browser to view the coverage report."
+ )
+
+ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE
+
+# Param _targetname The name of new the custom make target
+# Param _testrunner The name of the target which runs the tests
+# Param _outputname cobertura output is generated as _outputname.xml
+# Optional fourth parameter is passed as arguments to _testrunner
+# Pass them in list form, e.g.: "-j;2" for -j 2
+FUNCTION(SETUP_TARGET_FOR_COVERAGE_COBERTURA _targetname _testrunner _outputname)
+
+ IF(NOT PYTHON_EXECUTABLE)
+ MESSAGE(FATAL_ERROR "Python not found! Aborting...")
+ ENDIF() # NOT PYTHON_EXECUTABLE
+
+ IF(NOT GCOVR_PATH)
+ MESSAGE(FATAL_ERROR "gcovr not found! Aborting...")
+ ENDIF() # NOT GCOVR_PATH
+ MARK_AS_ADVANCED(GCOVR_PATH)
+
+ ADD_CUSTOM_TARGET(${_targetname}
+
+ # Run tests
+ ${_testrunner} ${ARGV3}
+
+ # Running gcovr
+ COMMAND ${GCOVR_PATH} -x -r ${CMAKE_SOURCE_DIR} -e '${CMAKE_SOURCE_DIR}/tests/' -o ${_outputname}.xml
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ COMMENT "Running gcovr to produce Cobertura code coverage report."
+ )
+
+ # Show info where to find the report
+ ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD
+ COMMAND ;
+ COMMENT "Cobertura code coverage report saved in ${_outputname}.xml."
+ )
+
+ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE_COBERTURA
diff --git a/cmake/Modules/FindLITESQL.cmake b/cmake/Modules/FindLITESQL.cmake
new file mode 100644
index 0000000..91155bb
--- /dev/null
+++ b/cmake/Modules/FindLITESQL.cmake
@@ -0,0 +1,76 @@
+# - Find LiteSQL
+#
+# Find the LiteSQL library, and defines a function to generate C++ files
+# from the database xml file using litesql-gen fro
+#
+# This module defines the following variables:
+# LITESQL_FOUND - True if library and include directory are found
+# If set to TRUE, the following are also defined:
+# LITESQL_INCLUDE_DIRS - The directory where to find the header file
+# LITESQL_LIBRARIES - Where to find the library file
+# LITESQL_GENERATE_CPP - A function, to be used like this:
+# LITESQL_GENERATE_CPP("db/database.xml" # The file defining the db schemas
+# "database" # The name of the C++ “module”
+# # that will be generated
+# LITESQL_GENERATED_SOURCES # Variable containing the
+# resulting C++ files to compile
+#
+# For conveniance, these variables are also set. They have the same values
+# than the variables above. The user can thus choose his/her prefered way
+# to write them.
+# LITESQL_INCLUDE_DIR
+# LITESQL_LIBRARY
+#
+# This file is in the public domain
+
+find_path(LITESQL_INCLUDE_DIRS NAMES litesql.hpp
+ DOC "The LiteSQL include directory")
+
+find_library(LITESQL_LIBRARIES NAMES litesql
+ DOC "The LiteSQL library")
+
+foreach(DB_TYPE sqlite postgresql mysql ocilib)
+ string(TOUPPER ${DB_TYPE} DB_TYPE_UPPER)
+ find_library(LITESQL_${DB_TYPE_UPPER}_LIB_PATH NAMES litesql_${DB_TYPE}
+ DOC "The ${DB_TYPE} backend for LiteSQL")
+ if(LITESQL_${DB_TYPE_UPPER}_LIB_PATH)
+ list(APPEND LITESQL_LIBRARIES ${LITESQL_${DB_TYPE_UPPER}_LIB_PATH})
+ endif()
+ mark_as_advanced(LITESQL_${DB_TYPE_UPPER}_LIB_PATH)
+endforeach()
+
+find_program(LITESQLGEN_EXECUTABLE NAMES litesql-gen
+ DOC "The utility that creates .h and .cpp files from a xml database description")
+
+# Use some standard module to handle the QUIETLY and REQUIRED arguments, and
+# set LITESQL_FOUND to TRUE if these two variables are set.
+include(FindPackageHandleStandardArgs)
+find_package_handle_standard_args(LITESQL REQUIRED_VARS LITESQL_LIBRARIES LITESQL_INCLUDE_DIRS
+ LITESQLGEN_EXECUTABLE)
+
+# Compatibility for all the ways of writing these variables
+if(LITESQL_FOUND)
+ set(LITESQL_INCLUDE_DIR ${LITESQL_INCLUDE_DIRS})
+ set(LITESQL_LIBRARY ${LITESQL_LIBRARIES})
+endif()
+
+mark_as_advanced(LITESQL_INCLUDE_DIRS LITESQL_LIBRARIES LITESQLGEN_EXECUTABLE)
+
+
+# LITESQL_GENERATE_CPP function
+
+function(LITESQL_GENERATE_CPP
+ SOURCE_FILE OUTPUT_NAME OUTPUT_SOURCES)
+ set(${OUTPUT_SOURCES})
+ add_custom_command(
+ OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/${OUTPUT_NAME}.cpp"
+ "${CMAKE_CURRENT_BINARY_DIR}/${OUTPUT_NAME}.hpp"
+ COMMAND ${LITESQLGEN_EXECUTABLE}
+ ARGS -t c++ --output-dir=${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_CURRENT_SOURCE_DIR}/${SOURCE_FILE}
+ DEPENDS ${SOURCE_FILE}
+ COMMENT "Running litesql-gen on ${SOURCE_FILE}"
+ VERBATIM)
+ list(APPEND ${OUTPUT_SOURCES} "${CMAKE_CURRENT_BINARY_DIR}/${OUTPUT_NAME}.cpp")
+ set_source_files_properties(${${OUTPUT_SOURCES}} PROPERTIES GENERATED TRUE)
+ set(${OUTPUT_SOURCES} ${${OUTPUT_SOURCES}} PARENT_SCOPE)
+endfunction()