summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CMakeLists.txt12
-rw-r--r--cmake/Modules/CodeCoverage.cmake205
-rwxr-xr-xscripts/build_and_run_tests.sh3
3 files changed, 218 insertions, 2 deletions
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 960b5d1..b6411ab 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -7,6 +7,7 @@ set(${PROJECT_NAME}_VERSION_MINOR 0)
set(${PROJECT_NAME}_VERSION_SUFFIX "~dev")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++1y -pedantic -Wall -Wextra")
+set(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage --coverage")
# Define a __FILENAME__ macro to get the filename of each file, instead of
# the full path as in __FILE__
@@ -183,6 +184,15 @@ add_custom_target(check COMMAND "test_suite"
DEPENDS test_suite)
#
+## Code coverage
+#
+include(CodeCoverage)
+SETUP_TARGET_FOR_COVERAGE(coverage
+ test_suite
+ coverage
+)
+
+#
## Install target
#
install(TARGETS ${PROJECT_NAME}
@@ -213,4 +223,4 @@ endif()
add_custom_target(PrintBuildParameters ALL
${CMAKE_COMMAND} -E cmake_echo_color --cyan "Compiling ${PROJECT_NAME} with ${STR_WITH_BOTAN}, ${STR_WITH_CARES}")
-configure_file(${CMAKE_CURRENT_SOURCE_DIR}/biboumi.h.cmake ${CMAKE_BINARY_DIR}/src/biboumi.h) \ No newline at end of file
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/biboumi.h.cmake ${CMAKE_BINARY_DIR}/src/biboumi.h)
diff --git a/cmake/Modules/CodeCoverage.cmake b/cmake/Modules/CodeCoverage.cmake
new file mode 100644
index 0000000..2e2d4a0
--- /dev/null
+++ b/cmake/Modules/CodeCoverage.cmake
@@ -0,0 +1,205 @@
+# Copyright (c) 2012 - 2015, Lars Bilke
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its contributors
+# may be used to endorse or promote products derived from this software without
+# specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#
+#
+# 2012-01-31, Lars Bilke
+# - Enable Code Coverage
+#
+# 2013-09-17, Joakim Söderberg
+# - Added support for Clang.
+# - Some additional usage instructions.
+#
+# USAGE:
+
+# 0. (Mac only) If you use Xcode 5.1 make sure to patch geninfo as described here:
+# http://stackoverflow.com/a/22404544/80480
+#
+# 1. Copy this file into your cmake modules path.
+#
+# 2. Add the following line to your CMakeLists.txt:
+# INCLUDE(CodeCoverage)
+#
+# 3. Set compiler flags to turn off optimization and enable coverage:
+# SET(CMAKE_CXX_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+# SET(CMAKE_C_FLAGS "-g -O0 -fprofile-arcs -ftest-coverage")
+#
+# 3. Use the function SETUP_TARGET_FOR_COVERAGE to create a custom make target
+# which runs your test executable and produces a lcov code coverage report:
+# Example:
+# SETUP_TARGET_FOR_COVERAGE(
+# my_coverage_target # Name for custom target.
+# test_driver # Name of the test driver executable that runs the tests.
+# # NOTE! This should always have a ZERO as exit code
+# # otherwise the coverage generation will not complete.
+# coverage # Name of output directory.
+# )
+#
+# 4. Build a Debug build:
+# cmake -DCMAKE_BUILD_TYPE=Debug ..
+# make
+# make my_coverage_target
+#
+#
+
+# Check prereqs
+FIND_PROGRAM( GCOV_PATH gcov )
+FIND_PROGRAM( LCOV_PATH lcov )
+FIND_PROGRAM( GENHTML_PATH genhtml )
+FIND_PROGRAM( GCOVR_PATH gcovr PATHS ${CMAKE_SOURCE_DIR}/tests)
+
+IF(NOT GCOV_PATH)
+ MESSAGE(FATAL_ERROR "gcov not found! Aborting...")
+ENDIF() # NOT GCOV_PATH
+
+IF(NOT CMAKE_COMPILER_IS_GNUCXX)
+ # Clang version 3.0.0 and greater now supports gcov as well.
+ MESSAGE(WARNING "Compiler is not GNU gcc! Clang Version 3.0.0 and greater supports gcov as well, but older versions don't.")
+
+ IF(NOT "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
+ MESSAGE(FATAL_ERROR "Compiler is not GNU gcc! Aborting...")
+ ENDIF()
+ENDIF() # NOT CMAKE_COMPILER_IS_GNUCXX
+
+SET(CMAKE_CXX_FLAGS_COVERAGE
+ "-g -O0 --coverage -fprofile-arcs -ftest-coverage"
+ CACHE STRING "Flags used by the C++ compiler during coverage builds."
+ FORCE )
+SET(CMAKE_C_FLAGS_COVERAGE
+ "-g -O0 --coverage -fprofile-arcs -ftest-coverage"
+ CACHE STRING "Flags used by the C compiler during coverage builds."
+ FORCE )
+SET(CMAKE_EXE_LINKER_FLAGS_COVERAGE
+ ""
+ CACHE STRING "Flags used for linking binaries during coverage builds."
+ FORCE )
+SET(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
+ ""
+ CACHE STRING "Flags used by the shared libraries linker during coverage builds."
+ FORCE )
+MARK_AS_ADVANCED(
+ CMAKE_CXX_FLAGS_COVERAGE
+ CMAKE_C_FLAGS_COVERAGE
+ CMAKE_EXE_LINKER_FLAGS_COVERAGE
+ CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
+
+IF ( NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR CMAKE_BUILD_TYPE STREQUAL "Coverage"))
+ MESSAGE( WARNING "Code coverage results with an optimized (non-Debug) build may be misleading" )
+ENDIF() # NOT CMAKE_BUILD_TYPE STREQUAL "Debug"
+
+
+# Param _targetname The name of new the custom make target
+# Param _testrunner The name of the target which runs the tests.
+# MUST return ZERO always, even on errors.
+# If not, no coverage report will be created!
+# Param _outputname lcov output is generated as _outputname.info
+# HTML report is generated in _outputname/index.html
+# Optional fifth parameter is passed as arguments to _testrunner
+# Pass them in list form, e.g.: "-j;2" for -j 2
+FUNCTION(SETUP_TARGET_FOR_COVERAGE _targetname _testrunner _outputname)
+
+ IF(NOT LCOV_PATH)
+ MESSAGE(FATAL_ERROR "lcov not found! Aborting...")
+ ENDIF() # NOT LCOV_PATH
+
+ IF(NOT GENHTML_PATH)
+ MESSAGE(FATAL_ERROR "genhtml not found! Aborting...")
+ ENDIF() # NOT GENHTML_PATH
+
+ # Setup target
+ ADD_CUSTOM_TARGET(${_targetname}
+
+ # Cleanup lcov
+ ${LCOV_PATH} --directory . --zerocounters
+
+ # Create baseline coverage data file
+ COMMAND ${LCOV_PATH} -c -i -d . -o ${_outputname}.baseline.info -q
+
+ # Run tests
+ COMMAND ${_testrunner} ${ARGV3}
+
+ # Capturing lcov counters and generating report
+ COMMAND ${LCOV_PATH} --directory . --capture --output-file ${_outputname}.info -q
+ # Combine the baseline and the test data
+ COMMAND ${LCOV_PATH} -a ${_outputname}.info -a ${_outputname}.baseline.info -o ${_outputname}.info -q
+
+ # Remove information about source files that are not part of
+ # the test (system file, external libraries, etc)
+ COMMAND ${LCOV_PATH} --remove ${_outputname}.info 'tests/*' '/usr/*' 'external/*' --output-file ${_outputname}.info.cleaned -q
+
+ # Generate the report
+ COMMAND ${GENHTML_PATH} -o ${_outputname} ${_outputname}.info.cleaned
+
+ # Clean the temporary files we created
+ COMMAND ${CMAKE_COMMAND} -E remove ${_outputname}.info ${_outputname}.info.cleaned
+
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
+ )
+
+ # Show info where to find the report
+ ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD
+ COMMAND ;
+ COMMENT "Open ./${_outputname}/index.html in your browser to view the coverage report."
+ )
+
+ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE
+
+# Param _targetname The name of new the custom make target
+# Param _testrunner The name of the target which runs the tests
+# Param _outputname cobertura output is generated as _outputname.xml
+# Optional fourth parameter is passed as arguments to _testrunner
+# Pass them in list form, e.g.: "-j;2" for -j 2
+FUNCTION(SETUP_TARGET_FOR_COVERAGE_COBERTURA _targetname _testrunner _outputname)
+
+ IF(NOT PYTHON_EXECUTABLE)
+ MESSAGE(FATAL_ERROR "Python not found! Aborting...")
+ ENDIF() # NOT PYTHON_EXECUTABLE
+
+ IF(NOT GCOVR_PATH)
+ MESSAGE(FATAL_ERROR "gcovr not found! Aborting...")
+ ENDIF() # NOT GCOVR_PATH
+
+ ADD_CUSTOM_TARGET(${_targetname}
+
+ # Run tests
+ ${_testrunner} ${ARGV3}
+
+ # Running gcovr
+ COMMAND ${GCOVR_PATH} -x -r ${CMAKE_SOURCE_DIR} -e '${CMAKE_SOURCE_DIR}/tests/' -o ${_outputname}.xml
+ WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
+ COMMENT "Running gcovr to produce Cobertura code coverage report."
+ )
+
+ # Show info where to find the report
+ ADD_CUSTOM_COMMAND(TARGET ${_targetname} POST_BUILD
+ COMMAND ;
+ COMMENT "Cobertura code coverage report saved in ${_outputname}.xml."
+ )
+
+ENDFUNCTION() # SETUP_TARGET_FOR_COVERAGE_COBERTURA
diff --git a/scripts/build_and_run_tests.sh b/scripts/build_and_run_tests.sh
index 738ef52..43d32c1 100755
--- a/scripts/build_and_run_tests.sh
+++ b/scripts/build_and_run_tests.sh
@@ -2,6 +2,7 @@
set -e -x
-cmake .. $@
+cmake .. -DCMAKE_BUILD_TYPE=Debug $@
make -j$(nproc) biboumi test_suite
make -j$(nproc) check
+make -j$(nproc) coverage