diff options
Diffstat (limited to 'doc/source/commands.rst')
| -rw-r--r-- | doc/source/commands.rst | 607 |
1 files changed, 389 insertions, 218 deletions
diff --git a/doc/source/commands.rst b/doc/source/commands.rst index 024dc3cc..ccc73821 100644 --- a/doc/source/commands.rst +++ b/doc/source/commands.rst @@ -24,149 +24,195 @@ Global commands These commands work in *any* tab. -**/help [command]** - If called without an argument, this command will list the - available commands. If it has a valid command as an argument, this command - will show the usage and the help for the given command. - -**/join [room_name][@server][/nick] [password]** - Join the specified room. You - can specify a nickname after a slash (/). If no nickname is specified, you - will use the default_nick in the configuration file. You can omit the room - name: you will then join the room you're looking at (useful if you were - kicked). You can also provide a room_name without specifying a server, the - server of the room you're currently in will be used. You can also provide a - password to join the room. - - *Examples:* - - - /join room@server.tld - - /join room@server.tld/John - - /join room2 - - /join /me_again - - /join - - /join room@server.tld/my_nick password - - /join / password - -**/exit and /quit** - Just disconnect from the server and exit poezio. - -.. _command-next: -**/next** - Go to the next room. - -.. _command-prev: -**/prev** - Go to the previous room. - -.. _command-win: -**/win <number> or /w <number>** - Go to the specified room. - -.. _command-status: -**/status <availability> [status message]** - Set your availability and - (optionaly) your status message. The <availability> argument is one of - "available, chat, away, afk, dnd, busy, xa" and the optional [status] argument - will be your status message.' - -.. _command-bookmark: -**/bookmark [roomname][/nick] [autojoin] [password]** - Bookmark the specified - room. This command uses almost the same syntax as /join. Type /help join for - syntax examples. Note that when typing /bookmark on its own, the room will be - bookmarked with the nickname you're currently using in this room (instead of - default_nick). You can specify an optional *autojoin* and *password* if you - call it with the full line (/bookmark alone will put the room in autojoin - without password). The bookmarks stored with this command are stored on your - xmpp server. - -.. _command-bookmark-local: -**/bookmark_local [roomname][/nick]** - Bookmark the specified room (you will - then auto-join it on each poezio start). This commands uses almost the same - syntax as /join. Type /help join for syntax examples. Note that when typing - /bookmark on its own, the room will be bookmarked with the nickname you're - currently using in this room (instead of default_nick). The bookmarks stored - with this command will be stored locally. They have priority over the ones - stored online. - -.. _command-remove-bookmark: -**/remove_bookmark [room_jid]** - Remove the bookmark on *room_jid* or the one on the current tab, if any. - -.. _command-bookmarks: -**/bookmarks** - Show the current bookmarks. - -.. _command-set: -**/set [plugin|][section] <option> <value>** - Set the value to the option in - your configuration file. You can, for example, change your default nickname - by doing "/set default_nick toto" or your resource with "/set resource - blabla". Doing so will write in the main config file, and in the main - section ([Poezio]). But you can also write to another section, with "/set - bindings M-i ^i", to a plugin configuration with "/set mpd_client| host - main" (notice the **|**, it is mandatory to write in a plugin), or even to - another section in a plugin configuration "/set plugin|other_section option - value". **toggle** can be used as a special value for a boolean option. It - just set the option to true if it’s currently false, and to false if it’s - currently true. - -.. _command-move-tab: -**/move_tab <source> <destination>** - Move tab <source> to <destination>. If - the create_gaps option is true, then it will leave a gap at the <source> - position, leading to usual behaviour. If create_gaps is not enabled, then the - tabs will number from 0 to your actual tab number, without gaps (which means - their number will change if you close a tab on the left of the list). - -.. _command-theme: -**/theme [theme_name]** - Reload the theme defined in the config file. If - _theme_name_ is given, this command will act like /set theme theme_name then - /theme. - -.. _command-presence: -**/presence <jid> [type] [status]** - Send a directed presence to _jid_ using - _type_ and _status_ if provided. - -*/rawxml <stanza>*:: Send a custom XML stanza. - -*/list [server.tld]*:: Get the list of public chatrooms in the specified server -. - -*/message <jid> [optional message]*:: Open a conversation with the specified - JID (event if it is not in our roster), and send a message to him, if - specified. - -*/version <jid>*:: Get the software version of the given JID (usually its XMPP - client and Operating System). - -*/invite <jid> <room> [reason]*:: Invite _jid_ to _room_ wit _reason_ (if - provided). - -*/invitations*:: Show the pending invitations. - -*/activity <jid>*:: Show the last activity of a contact or a server (its - uptime, in that case). - -*/server_cycle [server.tld] [message]*:: Disconnect and reconnect in all the - rooms of server.tld. - -*/bind <key> <eq>*:: Bind a key to another key or to a "command". For example, - "/bind ^H KEY_UP" makes Control + h behave the same way as the Up key. See the - link:keys.html[key bindings documentation page] for more details. - -*/runkey <key>*:: Execute the action defined for _key_. For example, - "/runkey KEY_PPAGE" will scroll up, or "/runkey ^N" will go to the next tab. - -*/self*:: Reminds you of who you are and what your status is. - -NOTE: The following command will work everywhere, except in the Roster tab. - -*/close*:: Close the tab. +.. glossary:: + :sorted: + + /help + **Usage:** ``/help [command]`` + + If called without an argument, this command will list the + available commands. If it has a valid command as an argument, this command + will show the usage and the help for the given command. + + /join + **Usage:** ``/join [room_name][@server][/nick] [password]`` + + Join the specified room. You + can specify a nickname after a slash (/). If no nickname is specified, you + will use the default_nick in the configuration file. You can omit the room + name: you will then join the room you're looking at (useful if you were + kicked). You can also provide a room_name without specifying a server, the + server of the room you're currently in will be used. You can also provide a + password to join the room. + + *Examples:* + + - ``/join room@server.tld`` + - ``/join room@server.tld/John`` + - ``/join room2`` + - ``/join /me_again`` + - ``/join`` + - ``/join room@server.tld/my_nick password`` + - ``/join / password`` + + /exit + /quit + Just disconnect from the server and exit poezio. + + /next + Go to the next room. + + /prev + Go to the previous room. + + /win + /w + **Usage:** ``/win <number>`` + + Go to the specified room. + + /status + **Usage:** ``/status <availability> [status message]`` + + Set your availability and + (optionaly) your status message. The <availability> argument is one of + "available, chat, away, afk, dnd, busy, xa" and the optional [status] argument + will be your status message.' + + /bookmark + **Usage:** ``/bookmark [roomname][/nick] [autojoin] [password]`` + + Bookmark the specified + room. This command uses almost the same syntax as /join. Type ``/help join`` for + syntax examples. Note that when typing /bookmark on its own, the room will be + bookmarked with the nickname you're currently using in this room (instead of + default_nick). You can specify an optional *autojoin* and *password* if you + call it with the full line (/bookmark alone will put the room in autojoin + without password). The bookmarks stored with this command are stored on your + xmpp server. + + /bookmark_local + **Usage:** ``/bookmark_local [roomname][/nick]`` + + Bookmark the specified room (you will + then auto-join it on each poezio start). This commands uses almost the same + syntax as /join. Type /help join for syntax examples. Note that when typing + /bookmark on its own, the room will be bookmarked with the nickname you're + currently using in this room (instead of default_nick). The bookmarks stored + with this command will be stored locally. They have priority over the ones + stored online. + + /remove_bookmark + **Usage:** ``/remove_bookmark [room_jid]`` + + Remove the bookmark on *room_jid* or the one on the current tab, if any. + + /bookmarks + Show the current bookmarks. + + /set + **Usage:** ``/set [plugin|][section] <option> <value>`` + + Set the value to the option in + your configuration file. You can, for example, change your default nickname + by doing "/set default_nick toto" or your resource with "/set resource + blabla". Doing so will write in the main config file, and in the main + section ([Poezio]). But you can also write to another section, with ``/set + bindings M-i ^i``, to a plugin configuration with ``/set mpd_client| host + main`` (notice the **|**, it is mandatory to write in a plugin), or even to + another section in a plugin configuration ``/set plugin|other_section option + value``. **toggle** can be used as a special value for a boolean option. It + just set the option to true if it’s currently false, and to false if it’s + currently true. + + /move_tab + **Usage:** ``/move_tab <source> <destination>`` + + Move tab <source> to <destination>. If + the create_gaps option is true, then it will leave a gap at the <source> + position, leading to usual behaviour. If create_gaps is not enabled, then the + tabs will number from 0 to your actual tab number, without gaps (which means + their number will change if you close a tab on the left of the list). + + /theme + **Usage:** ``/theme [theme_name]`` + + Reload the theme defined in the config file. If + *theme_name* is given, this command will act like :samp:`/set theme {theme_name}` then + /theme. + + /presence + **Usage:** ``/presence <jid> [type] [status]`` + + Send a directed presence to *jid* using + *type* and *status* if provided. + + /rawxml + **Usage:** ``/rawxml <stanza>`` + + Send a custom XML stanza. + + /list + **Usage:** ``/list [server.tld]`` + + Get the list of public chatrooms in the specified server + + /message + **Usage:** ``/message <jid> [optional message]`` + + Open a conversation with the specified JID (event if it is not in our roster), + and send a message to him/her, if specified. + + /version + **Usage:** ``/version <jid>`` + + Get the software version of the given JID (usually its XMPP + client and Operating System). + + /invite + **Usage:** ``/invite <jid> <room> [reason]`` + + Invite *jid* to *room* with *reason* (if + provided). + + /invitations + Show the pending invitations. + + /activity + **Usage:** ``/activity <jid>`` + + Show the last activity of a contact or a server (its + uptime, in that case). + + /server_cycle + **Usage:** ``/server_cycle [server.tld] [message]`` + + Disconnect and reconnect in all the + rooms of server.tld. + + /bind + **Usage:** ``/bind <key> <eq>`` + + Bind a key to another key or to a "command". For example, + ``/bind ^H KEY_UP`` makes Control + h behave the same way as the Up key. See the + *key bindings documentation page* for more details. + + /runkey + **Usage:** ``/runkey <key>`` + + Execute the action defined for *key*. For example, + ``/runkey KEY_PPAGE`` will scroll up, or ``/runkey ^N`` will go to the next tab. + + /self + Reminds you of who you are and what your status is. + + + /close + Close the tab. + + .. note:: The /close command will work everywhere, except in the Roster tab, + which can’t be closed. + Chat tab commands ~~~~~~~~~~~~~~~~~ @@ -174,133 +220,258 @@ Chat tab commands These commands will work in any conversation tab (MultiUserChat, Private, or Conversation tabs). -*/say <message>*:: Just send the message (only useful it you want your message - to begin with a _/_). Note that you can also send message starting with a _/_ - by starting it with _//_. +.. glossary:: + :sorted: + + /say + **Usage:** ``/say <message>`` + + Just send the message (only useful it you want your message + to begin with a **/**). Note that you can also send message starting with a **/** + by starting it with **//**. + + /xhtml + **Usage:** ``/xhtml <custom xhtml>`` -*/xhtml <custom xhtml>*:: Send a custom xhtml message to the current tab. + Send a custom xhtml message to the current tab. -*/clear*:: Clear the current buffer. + /clear + Clear the current buffer. MultiUserChat tab commands ~~~~~~~~~~~~~~~~~~~~~~~~~~ -*/ignore <nickname>*:: Ignore a specified nickname. +.. glossary:: + :sorted: + + /ignore + **Usage:** ``/ignore <nickname>`` + + Ignore a specified nickname. + + /unignore + **Usage:** ``/unignore <nickname>`` + + Remove the specified nickname from the ignore list. + + /kick + **Usage:** ``/kick <nick> [reason]`` -*/unignore <nickname>*:: Remove the specified nickname from the ignore list. + Kick the user with the specified nickname. You can + also give an optional reason. -*/kick <nick> [reason]*:: Kick the user with the specified nickname. You can - also give an optional reason. + /topic + **Usage:** ``/topic <subject>`` -*/topic <subject>*:: Change the subject of the room. You might want to knwow - that entering "/topic [tab]" will autocomplete the topic. + Change the subject of the room. You might want to knwow + that entering ``/topic [tab]`` will autocomplete the topic. -*/query <nick> [message]*:: Open a private conversation with <nick>. This nick - has to be present in the room you’re currently in. If you specified a message - after the nickname, it will be sent to this user. + /query + **Usage:** ``/query <nick> [message]`` -*/part [message]*:: Disconnect you from a room. You can specify an optional - message. + Open a private conversation with <nick>. This nick + has to be present in the room you’re currently in. If you specified a message + after the nickname, it will be sent to this user. -*/close [message]*:: Disconnect you from a room (if you are connected) and - close the tab. You can specify an optional message if you are still connected. + /part + **Usage:** ``/part [message]`` -*/nick <nickname>*:: Change your nickname in the current room. - *Except for gmail users* because gmail.com sucks and will do weird things - if you change your nickname in a MUC. + Disconnect you from a room. You can specify an optional + message. -*/recolor [random]*:: Re-assign a color to all the participants in the current - room, based on the last time they talked. Use this if the participants - currently talking have too many identical colors. If a random argument is - given, the participants will be shuffled before they are assigned a color. + /nick + **Usage:** ``/nick <nickname>`` -*/cycle [message]*:: Leave the current room an rejoint it immediatly. You can - specify an optional quit message. + Change your nickname in the current room. + **Except for gmail users** because gmail.com sucks and will do weird things + if you change your nickname in a MUC. -*/info <nickname>*:: Display some information about the user in the room: - his/her role, affiliation, status, and status message. + /recolor + **Usage:** ``/recolor [random]`` -*/version <nickname or jid>*:: Get the software version of the given nick in - room or the given jid (usually its XMPP client and Operating System). + Re-assign a color to all the participants in the current + room, based on the last time they talked. Use this if the participants + currently talking have too many identical colors. If a random argument is + given, the participants will be shuffled before they are assigned a color. -*/configure*:: Configure the current room through a form. + /cycle + **Usage:** ``/cycle [message]`` -*/names*:: Get the list of the users in the room, their number, and the list - of the people assuming different roles. + Leave the current room an rejoint it immediatly. You can + specify an optional quit message. + + /info + **Usage:** ``/info <nickname>`` + + Display some information about the user in the room: + his/her role, affiliation, status, and status message. + + /version [MUC tab version] + **Usage:** ``/version <nickname or jid>`` + + Get the software version of the given nick in + room or the given jid (usually its XMPP client and Operating System). + + /configure + Configure the current room through a form. + + /names + Get the list of the users in the room, their number, and the list + of the people assuming different roles. Private tab commands ~~~~~~~~~~~~~~~~~~~~ -*/info*:: Display some info about this user in the MultiUserChat. +.. glossary:: + :sorted: + + /info [Private tab version] + Display some info about this user in the MultiUserChat. -*/unquery*:: Close the tab. + /unquery [Private tab version] + Close the tab. -*/version*:: Get the software version of the current interlocutor (usually its - XMPP client and Operating System). + /version [Private tab version] + Get the software version of the current interlocutor (usually its + XMPP client and Operating System). Normal Conversation tab commands ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -*/info*:: Display the status of this contact. +.. glossary:: + :sorted: + + /info [Conversation tab version] + Display the status of this contact. -*/unquery*:: Close the tab. + /unquery [Conversation tab version] + Close the tab. -*/version*:: Get the software version of the current interlocutor (usually its - XMPP client and Operating System). + /version [Conversation tab version] + Get the software version of the current interlocutor (usually its + XMPP client and Operating System). Roster tab commands ~~~~~~~~~~~~~~~~~~~ +.. glossary:: + :sorted: + + /accept + **Usage:** ``/accept [jid]`` + + Authorize the provided JID (or the selected contact in the + roster) to see your presence. -*/accept [jid]*:: Authorize the provided JID (or the selected contact in the - roster) to see your presence. + /deny + **Usage:** ``/deny [jid]`` -*/deny [jid]*:: Prevent the provided JID (or the selected contact in the - roster) from seeing your presence. + Prevent the provided JID (or the selected contact in the + roster) from seeing your presence. -*/add <jid>*:: Add the specified JID to your roster and authorize him to see - your presence. If he accepts you, the subscription will be mutual (and if he - doesn’t, you can still /deny him). + /add + **Usage:** ``/add <jid>`` -*/name <jid> <name>*:: Set the given JID’s name. + Add the specified JID to your roster and authorize him to see + your presence. If he accepts you, the subscription will be mutual (and if he + doesn’t, you can still /remove him). -*/groupadd <jid> <group>*:: Add the given JID to the given group (if the group - does not exist, it will be created). + /name + **Usage:** ``/name <jid> <name>`` -*/groupmove <jid> <old_group> <new_group>*:: Move the given JID from one group - to another (the JID has to be in the first group, and the new group may not - exist). + Set the given JID’s name in your roster. -*/groupremove <jid> <group>*:: Remove the given JID from the given group (if - the group is empty after that, it will get deleted). + /groupadd + **Usage:** ``/groupadd <jid> <group>`` -*/remove [jid]*:: Remove the specified JID from your roster. This will - unsubscribe you from its presence, cancel its subscription to yours, and - remove the item from your roster. + Add the given JID to the given group (if the group + does not exist, it will be created). -*/reconnect*:: Disconnect from the remote server (if connected) and then - connect to it again. + /groupmove + **Usage:** ``/groupmove <jid> <old_group> <new_group>`` -NOTE: The following commands only exist if your server supports them. If it -does not, you will be notified when you start poezio. + Move the given JID from one group + to another (the JID has to be in the first group, and the new group may not + exist). -*/block [jid]*:: Block the following JID using simple blocking. You will not - receive any of his messages and won’t be able to send some to him either. + /groupremove + **Usage:** ``/groupremove <jid> <group>`` -*/unblock [jid]*:: Unblock a previously blocked JID using simple blocking. You - will be able to send and receive messages from him again. + Remove the given JID from the given group (if + the group is empty after that, it will get deleted). -*/list_blocks*:: List the blocked JIDs. + /remove + **Usage:** ``/remove [jid]`` -NOTE: The following commands do not comply with any XEP or whatever, but they + Remove the specified JID from your roster. This will + unsubscribe you from its presence, cancel its subscription to yours, and + remove the item from your roster. + + /reconnect + + Disconnect from the remote server (if connected) and then + connect to it again. + +.. note:: The following commands only exist if your server supports them. If it + does not, you will be notified when you start poezio. + +.. glossary:: + :sorted: + + /block + **Usage:** ``/block [jid]`` + + Block the following JID using simple blocking. You will not + receive any of his messages and won’t be able to send some to him either. + + /unblock + **Usage:** ``/unblock [jid]`` + + Unblock a previously blocked JID using simple blocking. You + will be able to send and receive messages from him again. + + /list_blocks + List the blocked JIDs. + +.. note:: The following commands do not comply with any XEP or whatever, but they can still prove useful when you are migrating to an other JID. -*/export [/path/to/file]*:: Export your contacts into /path/to/file if - specified, or $HOME/poezio_contacts if not. +.. glossary:: + :sorted: + + /export + **Usage:** ``/export [/path/to/file]`` -*/import [/path/to/file]*:: Import your contacts from /path/to/file if - specified, or $HOME/poezio_contacts if not. + Export your contacts into /path/to/file if + specified, or $HOME/poezio_contacts if not. + + /import + **Usage:** ``/import [/path/to/file]`` + + Import your contacts from /path/to/file if + specified, or $HOME/poezio_contacts if not. XML tab commands ~~~~~~~~~~~~~~~~ -*/clear*:: Clear the current buffer. +.. glossary:: + + /clear [XML tab version] + Clear the current buffer. + + /reset + Reset the stanza filter. + + /filter_id + **Usage:** ``/filter_id <id>`` + + Filter by stanza id attribute. + + /filter_xpath + **Usage:** ``/filter_xpath <xpath>`` + + Filter with an XPath selector. + + /filter_xmlmask + **Usage:** ``/filter_xmlmask <xml mask>`` + + Filter using an XML mask |