diff options
Diffstat (limited to 'data')
| -rw-r--r-- | data/default_config.cfg | 187 |
1 files changed, 95 insertions, 92 deletions
diff --git a/data/default_config.cfg b/data/default_config.cfg index ac3a72f2..7135456b 100644 --- a/data/default_config.cfg +++ b/data/default_config.cfg @@ -1,6 +1,9 @@ # This is the default config for the XMPP client Poezio. # Comments should be on their own line and NOT at the end # of a meaningful line. +# Most options are commented in order to not override the +# default value which may have been changed since the time +# the file was copied on setup. [Poezio] @@ -54,7 +57,7 @@ resource = # The server used for anonymous connection. # Make sure the server you're using accepts anonymous authentication -server = anon.jeproteste.info +#server = anon.jeproteste.info # TLS Certificate fingerprint # Do not touch this if you don’t know what you are doing @@ -64,20 +67,20 @@ certificate = # this list prioritizes forward secrecy and forbids anything # weaker than 128 bits. # You should probably leave it as it is -ciphers = HIGH+kEDH:HIGH+kEECDH:HIGH:!PSK:!SRP:!3DES:!aNULL +#ciphers = HIGH+kEDH:HIGH+kEECDH:HIGH:!PSK:!SRP:!3DES:!aNULL # Skip the TLS certificate fingerprint verification # Should be false in most cases, as you want to check that the server keeps # the same certificate. -ignore_certificate = false +#ignore_certificate = false # Force TLS on by default -force_encryption = true +#force_encryption = true # The interval to send a whitespace keepalive to the server # 300 should be fine, except for specific services, in that case, change the # value to the services default. -whitespace_interval = 300 +#whitespace_interval = 300 # Path to the certificate authenticating the Authority # A server may have several certificates, but if it uses a CA, it will often @@ -87,41 +90,41 @@ whitespace_interval = 300 ca_cert_path = # Auto-reconnects you when you get disconnected from the server -auto_reconnect = true +#auto_reconnect = true # The time between the ping sent to the server to check if the connection is alive -connection_check_interval = 60 +#connection_check_interval = 60 # The timeout value of those pings -connection_timeout_delay = 10 +#connection_timeout_delay = 10 # Send the initial presence # true, unless you want to be invisible from your roster # warning: this disables any presence sending other than MUCs or directed # presences via /presence -send_initial_presence = true +#send_initial_presence = true # The status (show) poezio will send when connecting. # can be: xa,dnd,away,available,chat. # An empty or invalid value will mean available. -status = +#status = # The status message you will have upon connection status_message = # Save the last used status in this file (in the status and status_message # options) -save_status = true +#save_status = true # A custom host that will be used instead of the DNS records for the server # (anonymous or the jid’s) defined above. # You should not need this in a "normal" use case. -custom_host = +#custom_host = # A custom port to use instead of the 5222. # This option can be combined with custom_host. # You should not need this in a "normal" use case. -custom_port = +#custom_port = # the method that poezio will use to store your bookmarks online # possible values are: privatexml, pep @@ -130,44 +133,44 @@ use_bookmarks_method = # use this option to force the use of local bookmarks # possible values are: anything/false -use_remote_bookmarks = true +#use_remote_bookmarks = true # Force the retrieval of the remote bookmarks even when the server # doesn't advertise support for your method -force_remote_bookmarks = false +#force_remote_bookmarks = false # Whether you want all bookmarks, even those without # autojoin, to be open on startup -open_all_bookmarks = false +#open_all_bookmarks = false # What will be put after the name, when using autocompletion at the # beginning of the input. A space will always be added after that -after_completion = , +#after_completion = , # Whether or not to add a space after a completion in the middle of the # input (not at the start of it) -add_space_after_completion = true +#add_space_after_completion = true # The maximum length of the nickname that will be displayed in the # conversation window. -max_nick_length = 25 +#max_nick_length = 25 # Show the timestamp of each messages, or not -show_timestamps = true +#show_timestamps = true # Allow a message to "correct" another message in the display if # the sender wants it. -group_corrections = true +#group_corrections = true # Words that you want to complete on recent words completion, # separated by a colon (:). # e.g. words = "anticonstitutionnellement:I protest:I like bananas:" -words = +#words = # XHTML-IM is an XMPP extension letting users send messages # containing XHTML and CSS formating. We can use this to make # colored text for example. -enable_xhtml_im = true +#enable_xhtml_im = true # Set a number for this setting. # The join OR status-change notices will be @@ -183,9 +186,9 @@ enable_xhtml_im = true # - status changes won't be displayed unless # the user talked in the last 2 minutes -hide_exit_join = -1 +#hide_exit_join = -1 -hide_status_change = 120 +#hide_status_change = 120 # Some informational messages (error, a contact getting connected, etc) @@ -194,30 +197,30 @@ hide_status_change = 120 # A list of message types that should make the information buffer grow # Possible values; error, roster, warning, info, help -information_buffer_popup_on = error roster warning help info +#information_buffer_popup_on = error roster warning help info # The time the message will be visible. If the message takes more than # one line, the popup will stay visible two second per additional lines -popup_time = 4 +#popup_time = 4 # Whether to hide the list of user in the MultiUserChat tabs or not. Useful # for example if you want to copy/paste the content of the buffer, or if you # want to gain space -hide_user_list = false +#hide_user_list = false # A list of words (or sentences) separated by colons (":"). All the # informational messages (described above) containing at least one of those # values will not be shown. -filter_info_messages = +#filter_info_messages = # Set to 'true' if you want to automatically rejoin the # rooms when you're kicked or banned -autorejoin = false +#autorejoin = false # Set to the number of seconds before reconnecting when you are kicked # or banned. No value, 0, or a negative value means you will be reconnected # instantly. Only effective if autorejoin is set to true. -autorejoin_delay = 5 +#autorejoin_delay = 5 # If you want poezio to join # the room with an alternative nickname when @@ -229,34 +232,34 @@ autorejoin_delay = 5 # For example, if you set "_", and wanted to use # the nickname "john", your alternative nickname # will be "john_" -alternative_nickname = +#alternative_nickname = # set to 'true' if you want to save logs of all the messages # in files. -use_log = false +#use_log = false # The number of lines to preload in a chat buffer when it opens # (the lines are preloaded from the log files) # 0 or a negative value disable that option -load_log = 10 +#load_log = 10 # If log_dir is not set, logs will be saved in $XDG_DATA_HOME/poezio/logs, # i.e. in ~/.local/share/poezio/logs/. So, you should specify the directory # you want to use instead. This directory will be created if it doesn't exist -log_dir = +#log_dir = # Log the errors poezio encounters in log_dir/errors.log # A false value disables this option. -log_errors = true +#log_errors = true # If plugins_dir is not set, plugins will be loaded from the plugins/ dir in the # poezio directory, then $XDG_DATA_HOME/poezio/plugins. # You can specify another directory to use. It will be created if it doesn't exist -plugins_dir = +#plugins_dir = # If plugins_conf_dir is not set, plugin configs will be loaded from # $XDG_CONFIG_HOME/poezio/plugins. You can specify another directory here. -plugins_conf_dir = +#plugins_conf_dir = # the full path to the photo (avatar) you want to use # it should be less than 16Ko @@ -267,7 +270,7 @@ plugins_conf_dir = # If you want to show all the tabs in the Tab bar, even those # with no activity, set to true. Else, set to false -show_inactive_tabs = true +#show_inactive_tabs = true # If you want to highlight tabs where the contact is typing # possible values: @@ -277,41 +280,41 @@ show_inactive_tabs = true # - muc: chatrooms # - true: all chat tabs # - false or anything else: no highlighting -show_composing_tabs = direct +#show_composing_tabs = direct # Ignore private messages received in chatrooms -ignore_private = false +#ignore_private = false # If you want to show the tab names in the bottom tab bar, set this to true -show_tab_names = false +#show_tab_names = false # If you want to disable the numbers in the bottom tab bar, set this to false -# If show_tab_names and show_tab_numbers are both false, the numbers will be +# If show_tab_names and show_tab_numbers are both false, the numbers will be # shown -show_tab_numbers = true +#show_tab_numbers = true # Use the contact name, the nick in the MUC instead of the full JID to # display the tab if set to true. -use_tab_nicks = true +#use_tab_nicks = true # If set to false, poezio will only display the user part of the JID (before # the @) when displaying the MUC tab name. -show_muc_jid = true +#show_muc_jid = true # If this option is set to false, the roster will not show the contact JIDs # when that is possible. # e.g. instead of: toto (toto@example.org) (2) # poezio will only show: toto (2) -show_roster_jids = true +#show_roster_jids = true # Show JIDs in conversation tabs -show_jid_in_conversations = true +#show_jid_in_conversations = true # show s2s errors in the roster -show_s2s_errors = true +#show_s2s_errors = true # If set to true, the roster will display the offline contacts too -roster_show_offline = false +#roster_show_offline = false # How to sort the contacts inside the roster groups. # They are used sequentially, (from left to right) @@ -326,7 +329,7 @@ roster_show_offline = false # You can arrange them however you like, and you have to separate them with # colons (":"). Keep in mind that if there are more than 3 or 4 your # sorting is most likely inefficient. -roster_sort = jid:show +#roster_sort = jid:show # How to sort the roster groups. # The principles are the same as roster_sort. @@ -338,7 +341,7 @@ roster_sort = jid:show # - connected: sort by number of connected contacts # - size: sort by group size # - none: put the "none" group (if any) at the end of the list -roster_group_sort = name +#roster_group_sort = name # The terminal can beep on various event. Put the event you want in a list # (separated by spaces). @@ -348,7 +351,7 @@ roster_group_sort = name # someone from a MUC) # - message (any message from a MUC) # - invite (when you receive an invitation for joining a MUC) -beep_on = highlight private invite +#beep_on = highlight private invite # Theme @@ -356,112 +359,112 @@ beep_on = highlight private invite # i.e. in ~/.local/share/poezio/themes/. So you should specify the directory you # want to use instead. This directory will be created at startup if it doesn't # exist -themes_dir = +#themes_dir = # The name of the theme file that will be used. The file should be located # in the theme_dir directory. # If the file is not found (or no filename is specified) the default # theme will be used instead -theme = default +#theme = default # Whether to create gaps when moving or closing a tab # (a gap means that the number of your tabs does not depend of the previous tabs # but only of the creation order) -create_gaps = false +#create_gaps = false # If Alt-x is pressed and you are already on the tab numbered "x", # you will go on the previous tab if that option is true -go_to_previous_tab_on_alt_number = false +#go_to_previous_tab_on_alt_number = false # If true, a vertical list of tabs, with their name, is displayed on the left of # the screen. -enable_vertical_tab_list = false +#enable_vertical_tab_list = false # Horizontal size of the vertical tab list -vertical_tab_list_size = 20 +#vertical_tab_list_size = 20 # If set to desc, the tabs will be displayed from top to bottom in the list, # if set to asc, they will be displayed from bottom to top. -vertical_tab_list_sort = desc +#vertical_tab_list_sort = desc # Show the user list at the bottom when in a MUC # (useful when you want to look at the bottom of the screen only) # possible values: desc, asc -user_list_sort = desc +#user_list_sort = desc # If the MUC nicks should receive a fixed color based on their text or not -deterministic_nick_colors = true +#deterministic_nick_colors = true # If _nick, nick_, _nick_, nick__ etc. should have the same color as nick -nick_color_aliases = true +#nick_color_aliases = true # The nick of people who join, part, change their status, etc. in a MUC will # be displayed using their nick color if true. -display_user_color_in_join_part = true +#display_user_color_in_join_part = true # Display user tune notifications as information messages or not -display_tune_notifications = false +#display_tune_notifications = false # Change the tab state when receiving MUC messages. # useful if you are connected to a high-volume chatroom and do not # want it to appear in your tab bar as active. Highlights are still # shown. -notify_messages = true +#notify_messages = true # Enable Message Carbons (XEP-0280) to deliver message copies from and to # other resources with carbons enabled. -enable_carbons = true +#enable_carbons = true # Acknowledge message delivery receipts (XEP-0184) -ack_message_receipts = true +#ack_message_receipts = true # Ask for message delivery receipts (XEP-0184) -request_message_receipts = true +#request_message_receipts = true # Extract base64 images received in XHTML-IM messages # if true. -extract_inline_images = true +#extract_inline_images = true # The directory where the images will be saved; if unset, # defaults to $XDG_CACHE_HOME/poezio/images. -tmp_image_dir = +#tmp_image_dir = # Receive the tune notifications or not (in order to display informations # in the roster). # If this is set to false, then the display_tune_notifications # option will be ignored. -enable_user_tune = true +#enable_user_tune = true # Display user gaming notifications as information messages or not -display_gaming_notifications = false +#display_gaming_notifications = false # Receive the gaming notifications or not (in order to display informations # in the roster). # If this is set to false, then the display_gaming_notifications # option will be ignored. -enable_user_gaming = true +#enable_user_gaming = true # Display user mood notifications as information messages or not -display_mood_notifications = false +#display_mood_notifications = false # Receive the mood notifications or not (in order to display informations # in the roster). # If this is set to false, then the display_mood_notifications # option will be ignored. -enable_user_mood = true +#enable_user_mood = true # Display user activity notifications as information messages or not -display_activity_notifications = false +#display_activity_notifications = false # Receive the activity notifications or not (in order to display informations # in the roster). # If this is set to false, then the display_activity_notifications # option will be ignored. -enable_user_activity = true +#enable_user_activity = true # If set to true, use the nickname broadcasted by the user if none has been # set manually. -enable_user_nick = true +#enable_user_nick = true # if true, chat states will be sent to the people you are talking to. # Chat states are, for example, messages informing that you are composing @@ -469,62 +472,62 @@ enable_user_nick = true # Set to false if you don't want people to know these information # Note that you won’t receive the chat states of your contacts # if you don't send yours. -send_chat_states = true +#send_chat_states = true # if true, information about the software (name and version) # will be sent if requested by anyone # Set to false if you don't want people to know these information -send_poezio_info = true +#send_poezio_info = true # if true, information about the Operation System you're using # will be sent when requested by anyone # Set to false if you don't want people to know these information # Note that this information will not be sent if send_poezio_info is False -send_os_info = true +#send_os_info = true # if true, your current time will be sent if asked # Set to false if you don't want people to know that information -send_time = true +#send_time = true # If true, the history of the similar inputs won't be shared between # different tabs (as in weechat). -separate_history = false +#separate_history = false # The language you specify using. # This *may* be used by an automated entity to send you tailored replies # If you don't understand, leave en. -lang = en +#lang = en # Configure the number of maximum lines and messages (for each tab) that # can be kept in memory. If poezio consumes too much memory, lower these # values -max_messages_in_memory = 2048 -max_lines_in_memory = 2048 +#max_messages_in_memory = 2048 +#max_lines_in_memory = 2048 # Show the separator at the bottom of the text buffer, even if no one # spoke -show_useless_separator = true +#show_useless_separator = true # Set this to true if you want the commands to be executed remotely # (with ssh & the daemon), see the documentation of the /link plugin # for details -exec_remote = false +#exec_remote = false # Path of the FIFO in which the remote commands will be sent. # The "poezio.fifo" file will be created in this directory # Used with exec_remote set to true, see the documentation of /link for details # Defaults to ./ -remote_fifo_path = ./ +#remote_fifo_path = ./ # Defines if all tabs are resized at the same time (if set to false) # or if they are really resized only when needed (if set to true). # “true” should be the most comfortable value -lazy_resize = true +#lazy_resize = true [bindings] # Bindings are keyboard shortcut aliases. You can use them # to define your own keys and bind them with some functions -# The syntaxe is +# The syntax is # key = bind # where ^x means Control + x # and M-x means Alt + x |