summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--data/default_config.cfg187
1 files changed, 95 insertions, 92 deletions
diff --git a/data/default_config.cfg b/data/default_config.cfg
index ac3a72f2..7135456b 100644
--- a/data/default_config.cfg
+++ b/data/default_config.cfg
@@ -1,6 +1,9 @@
# This is the default config for the XMPP client Poezio.
# Comments should be on their own line and NOT at the end
# of a meaningful line.
+# Most options are commented in order to not override the
+# default value which may have been changed since the time
+# the file was copied on setup.
[Poezio]
@@ -54,7 +57,7 @@ resource =
# The server used for anonymous connection.
# Make sure the server you're using accepts anonymous authentication
-server = anon.jeproteste.info
+#server = anon.jeproteste.info
# TLS Certificate fingerprint
# Do not touch this if you don’t know what you are doing
@@ -64,20 +67,20 @@ certificate =
# this list prioritizes forward secrecy and forbids anything
# weaker than 128 bits.
# You should probably leave it as it is
-ciphers = HIGH+kEDH:HIGH+kEECDH:HIGH:!PSK:!SRP:!3DES:!aNULL
+#ciphers = HIGH+kEDH:HIGH+kEECDH:HIGH:!PSK:!SRP:!3DES:!aNULL
# Skip the TLS certificate fingerprint verification
# Should be false in most cases, as you want to check that the server keeps
# the same certificate.
-ignore_certificate = false
+#ignore_certificate = false
# Force TLS on by default
-force_encryption = true
+#force_encryption = true
# The interval to send a whitespace keepalive to the server
# 300 should be fine, except for specific services, in that case, change the
# value to the services default.
-whitespace_interval = 300
+#whitespace_interval = 300
# Path to the certificate authenticating the Authority
# A server may have several certificates, but if it uses a CA, it will often
@@ -87,41 +90,41 @@ whitespace_interval = 300
ca_cert_path =
# Auto-reconnects you when you get disconnected from the server
-auto_reconnect = true
+#auto_reconnect = true
# The time between the ping sent to the server to check if the connection is alive
-connection_check_interval = 60
+#connection_check_interval = 60
# The timeout value of those pings
-connection_timeout_delay = 10
+#connection_timeout_delay = 10
# Send the initial presence
# true, unless you want to be invisible from your roster
# warning: this disables any presence sending other than MUCs or directed
# presences via /presence
-send_initial_presence = true
+#send_initial_presence = true
# The status (show) poezio will send when connecting.
# can be: xa,dnd,away,available,chat.
# An empty or invalid value will mean available.
-status =
+#status =
# The status message you will have upon connection
status_message =
# Save the last used status in this file (in the status and status_message
# options)
-save_status = true
+#save_status = true
# A custom host that will be used instead of the DNS records for the server
# (anonymous or the jid’s) defined above.
# You should not need this in a "normal" use case.
-custom_host =
+#custom_host =
# A custom port to use instead of the 5222.
# This option can be combined with custom_host.
# You should not need this in a "normal" use case.
-custom_port =
+#custom_port =
# the method that poezio will use to store your bookmarks online
# possible values are: privatexml, pep
@@ -130,44 +133,44 @@ use_bookmarks_method =
# use this option to force the use of local bookmarks
# possible values are: anything/false
-use_remote_bookmarks = true
+#use_remote_bookmarks = true
# Force the retrieval of the remote bookmarks even when the server
# doesn't advertise support for your method
-force_remote_bookmarks = false
+#force_remote_bookmarks = false
# Whether you want all bookmarks, even those without
# autojoin, to be open on startup
-open_all_bookmarks = false
+#open_all_bookmarks = false
# What will be put after the name, when using autocompletion at the
# beginning of the input. A space will always be added after that
-after_completion = ,
+#after_completion = ,
# Whether or not to add a space after a completion in the middle of the
# input (not at the start of it)
-add_space_after_completion = true
+#add_space_after_completion = true
# The maximum length of the nickname that will be displayed in the
# conversation window.
-max_nick_length = 25
+#max_nick_length = 25
# Show the timestamp of each messages, or not
-show_timestamps = true
+#show_timestamps = true
# Allow a message to "correct" another message in the display if
# the sender wants it.
-group_corrections = true
+#group_corrections = true
# Words that you want to complete on recent words completion,
# separated by a colon (:).
# e.g. words = "anticonstitutionnellement:I protest:I like bananas:"
-words =
+#words =
# XHTML-IM is an XMPP extension letting users send messages
# containing XHTML and CSS formating. We can use this to make
# colored text for example.
-enable_xhtml_im = true
+#enable_xhtml_im = true
# Set a number for this setting.
# The join OR status-change notices will be
@@ -183,9 +186,9 @@ enable_xhtml_im = true
# - status changes won't be displayed unless
# the user talked in the last 2 minutes
-hide_exit_join = -1
+#hide_exit_join = -1
-hide_status_change = 120
+#hide_status_change = 120
# Some informational messages (error, a contact getting connected, etc)
@@ -194,30 +197,30 @@ hide_status_change = 120
# A list of message types that should make the information buffer grow
# Possible values; error, roster, warning, info, help
-information_buffer_popup_on = error roster warning help info
+#information_buffer_popup_on = error roster warning help info
# The time the message will be visible. If the message takes more than
# one line, the popup will stay visible two second per additional lines
-popup_time = 4
+#popup_time = 4
# Whether to hide the list of user in the MultiUserChat tabs or not. Useful
# for example if you want to copy/paste the content of the buffer, or if you
# want to gain space
-hide_user_list = false
+#hide_user_list = false
# A list of words (or sentences) separated by colons (":"). All the
# informational messages (described above) containing at least one of those
# values will not be shown.
-filter_info_messages =
+#filter_info_messages =
# Set to 'true' if you want to automatically rejoin the
# rooms when you're kicked or banned
-autorejoin = false
+#autorejoin = false
# Set to the number of seconds before reconnecting when you are kicked
# or banned. No value, 0, or a negative value means you will be reconnected
# instantly. Only effective if autorejoin is set to true.
-autorejoin_delay = 5
+#autorejoin_delay = 5
# If you want poezio to join
# the room with an alternative nickname when
@@ -229,34 +232,34 @@ autorejoin_delay = 5
# For example, if you set "_", and wanted to use
# the nickname "john", your alternative nickname
# will be "john_"
-alternative_nickname =
+#alternative_nickname =
# set to 'true' if you want to save logs of all the messages
# in files.
-use_log = false
+#use_log = false
# The number of lines to preload in a chat buffer when it opens
# (the lines are preloaded from the log files)
# 0 or a negative value disable that option
-load_log = 10
+#load_log = 10
# If log_dir is not set, logs will be saved in $XDG_DATA_HOME/poezio/logs,
# i.e. in ~/.local/share/poezio/logs/. So, you should specify the directory
# you want to use instead. This directory will be created if it doesn't exist
-log_dir =
+#log_dir =
# Log the errors poezio encounters in log_dir/errors.log
# A false value disables this option.
-log_errors = true
+#log_errors = true
# If plugins_dir is not set, plugins will be loaded from the plugins/ dir in the
# poezio directory, then $XDG_DATA_HOME/poezio/plugins.
# You can specify another directory to use. It will be created if it doesn't exist
-plugins_dir =
+#plugins_dir =
# If plugins_conf_dir is not set, plugin configs will be loaded from
# $XDG_CONFIG_HOME/poezio/plugins. You can specify another directory here.
-plugins_conf_dir =
+#plugins_conf_dir =
# the full path to the photo (avatar) you want to use
# it should be less than 16Ko
@@ -267,7 +270,7 @@ plugins_conf_dir =
# If you want to show all the tabs in the Tab bar, even those
# with no activity, set to true. Else, set to false
-show_inactive_tabs = true
+#show_inactive_tabs = true
# If you want to highlight tabs where the contact is typing
# possible values:
@@ -277,41 +280,41 @@ show_inactive_tabs = true
# - muc: chatrooms
# - true: all chat tabs
# - false or anything else: no highlighting
-show_composing_tabs = direct
+#show_composing_tabs = direct
# Ignore private messages received in chatrooms
-ignore_private = false
+#ignore_private = false
# If you want to show the tab names in the bottom tab bar, set this to true
-show_tab_names = false
+#show_tab_names = false
# If you want to disable the numbers in the bottom tab bar, set this to false
-# If show_tab_names and show_tab_numbers are both false, the numbers will be
+# If show_tab_names and show_tab_numbers are both false, the numbers will be
# shown
-show_tab_numbers = true
+#show_tab_numbers = true
# Use the contact name, the nick in the MUC instead of the full JID to
# display the tab if set to true.
-use_tab_nicks = true
+#use_tab_nicks = true
# If set to false, poezio will only display the user part of the JID (before
# the @) when displaying the MUC tab name.
-show_muc_jid = true
+#show_muc_jid = true
# If this option is set to false, the roster will not show the contact JIDs
# when that is possible.
# e.g. instead of: toto (toto@example.org) (2)
# poezio will only show: toto (2)
-show_roster_jids = true
+#show_roster_jids = true
# Show JIDs in conversation tabs
-show_jid_in_conversations = true
+#show_jid_in_conversations = true
# show s2s errors in the roster
-show_s2s_errors = true
+#show_s2s_errors = true
# If set to true, the roster will display the offline contacts too
-roster_show_offline = false
+#roster_show_offline = false
# How to sort the contacts inside the roster groups.
# They are used sequentially, (from left to right)
@@ -326,7 +329,7 @@ roster_show_offline = false
# You can arrange them however you like, and you have to separate them with
# colons (":"). Keep in mind that if there are more than 3 or 4 your
# sorting is most likely inefficient.
-roster_sort = jid:show
+#roster_sort = jid:show
# How to sort the roster groups.
# The principles are the same as roster_sort.
@@ -338,7 +341,7 @@ roster_sort = jid:show
# - connected: sort by number of connected contacts
# - size: sort by group size
# - none: put the "none" group (if any) at the end of the list
-roster_group_sort = name
+#roster_group_sort = name
# The terminal can beep on various event. Put the event you want in a list
# (separated by spaces).
@@ -348,7 +351,7 @@ roster_group_sort = name
# someone from a MUC)
# - message (any message from a MUC)
# - invite (when you receive an invitation for joining a MUC)
-beep_on = highlight private invite
+#beep_on = highlight private invite
# Theme
@@ -356,112 +359,112 @@ beep_on = highlight private invite
# i.e. in ~/.local/share/poezio/themes/. So you should specify the directory you
# want to use instead. This directory will be created at startup if it doesn't
# exist
-themes_dir =
+#themes_dir =
# The name of the theme file that will be used. The file should be located
# in the theme_dir directory.
# If the file is not found (or no filename is specified) the default
# theme will be used instead
-theme = default
+#theme = default
# Whether to create gaps when moving or closing a tab
# (a gap means that the number of your tabs does not depend of the previous tabs
# but only of the creation order)
-create_gaps = false
+#create_gaps = false
# If Alt-x is pressed and you are already on the tab numbered "x",
# you will go on the previous tab if that option is true
-go_to_previous_tab_on_alt_number = false
+#go_to_previous_tab_on_alt_number = false
# If true, a vertical list of tabs, with their name, is displayed on the left of
# the screen.
-enable_vertical_tab_list = false
+#enable_vertical_tab_list = false
# Horizontal size of the vertical tab list
-vertical_tab_list_size = 20
+#vertical_tab_list_size = 20
# If set to desc, the tabs will be displayed from top to bottom in the list,
# if set to asc, they will be displayed from bottom to top.
-vertical_tab_list_sort = desc
+#vertical_tab_list_sort = desc
# Show the user list at the bottom when in a MUC
# (useful when you want to look at the bottom of the screen only)
# possible values: desc, asc
-user_list_sort = desc
+#user_list_sort = desc
# If the MUC nicks should receive a fixed color based on their text or not
-deterministic_nick_colors = true
+#deterministic_nick_colors = true
# If _nick, nick_, _nick_, nick__ etc. should have the same color as nick
-nick_color_aliases = true
+#nick_color_aliases = true
# The nick of people who join, part, change their status, etc. in a MUC will
# be displayed using their nick color if true.
-display_user_color_in_join_part = true
+#display_user_color_in_join_part = true
# Display user tune notifications as information messages or not
-display_tune_notifications = false
+#display_tune_notifications = false
# Change the tab state when receiving MUC messages.
# useful if you are connected to a high-volume chatroom and do not
# want it to appear in your tab bar as active. Highlights are still
# shown.
-notify_messages = true
+#notify_messages = true
# Enable Message Carbons (XEP-0280) to deliver message copies from and to
# other resources with carbons enabled.
-enable_carbons = true
+#enable_carbons = true
# Acknowledge message delivery receipts (XEP-0184)
-ack_message_receipts = true
+#ack_message_receipts = true
# Ask for message delivery receipts (XEP-0184)
-request_message_receipts = true
+#request_message_receipts = true
# Extract base64 images received in XHTML-IM messages
# if true.
-extract_inline_images = true
+#extract_inline_images = true
# The directory where the images will be saved; if unset,
# defaults to $XDG_CACHE_HOME/poezio/images.
-tmp_image_dir =
+#tmp_image_dir =
# Receive the tune notifications or not (in order to display informations
# in the roster).
# If this is set to false, then the display_tune_notifications
# option will be ignored.
-enable_user_tune = true
+#enable_user_tune = true
# Display user gaming notifications as information messages or not
-display_gaming_notifications = false
+#display_gaming_notifications = false
# Receive the gaming notifications or not (in order to display informations
# in the roster).
# If this is set to false, then the display_gaming_notifications
# option will be ignored.
-enable_user_gaming = true
+#enable_user_gaming = true
# Display user mood notifications as information messages or not
-display_mood_notifications = false
+#display_mood_notifications = false
# Receive the mood notifications or not (in order to display informations
# in the roster).
# If this is set to false, then the display_mood_notifications
# option will be ignored.
-enable_user_mood = true
+#enable_user_mood = true
# Display user activity notifications as information messages or not
-display_activity_notifications = false
+#display_activity_notifications = false
# Receive the activity notifications or not (in order to display informations
# in the roster).
# If this is set to false, then the display_activity_notifications
# option will be ignored.
-enable_user_activity = true
+#enable_user_activity = true
# If set to true, use the nickname broadcasted by the user if none has been
# set manually.
-enable_user_nick = true
+#enable_user_nick = true
# if true, chat states will be sent to the people you are talking to.
# Chat states are, for example, messages informing that you are composing
@@ -469,62 +472,62 @@ enable_user_nick = true
# Set to false if you don't want people to know these information
# Note that you won’t receive the chat states of your contacts
# if you don't send yours.
-send_chat_states = true
+#send_chat_states = true
# if true, information about the software (name and version)
# will be sent if requested by anyone
# Set to false if you don't want people to know these information
-send_poezio_info = true
+#send_poezio_info = true
# if true, information about the Operation System you're using
# will be sent when requested by anyone
# Set to false if you don't want people to know these information
# Note that this information will not be sent if send_poezio_info is False
-send_os_info = true
+#send_os_info = true
# if true, your current time will be sent if asked
# Set to false if you don't want people to know that information
-send_time = true
+#send_time = true
# If true, the history of the similar inputs won't be shared between
# different tabs (as in weechat).
-separate_history = false
+#separate_history = false
# The language you specify using.
# This *may* be used by an automated entity to send you tailored replies
# If you don't understand, leave en.
-lang = en
+#lang = en
# Configure the number of maximum lines and messages (for each tab) that
# can be kept in memory. If poezio consumes too much memory, lower these
# values
-max_messages_in_memory = 2048
-max_lines_in_memory = 2048
+#max_messages_in_memory = 2048
+#max_lines_in_memory = 2048
# Show the separator at the bottom of the text buffer, even if no one
# spoke
-show_useless_separator = true
+#show_useless_separator = true
# Set this to true if you want the commands to be executed remotely
# (with ssh & the daemon), see the documentation of the /link plugin
# for details
-exec_remote = false
+#exec_remote = false
# Path of the FIFO in which the remote commands will be sent.
# The "poezio.fifo" file will be created in this directory
# Used with exec_remote set to true, see the documentation of /link for details
# Defaults to ./
-remote_fifo_path = ./
+#remote_fifo_path = ./
# Defines if all tabs are resized at the same time (if set to false)
# or if they are really resized only when needed (if set to true).
# “true” should be the most comfortable value
-lazy_resize = true
+#lazy_resize = true
[bindings]
# Bindings are keyboard shortcut aliases. You can use them
# to define your own keys and bind them with some functions
-# The syntaxe is
+# The syntax is
# key = bind
# where ^x means Control + x
# and M-x means Alt + x