====================== Biboumi(1) User Manual ====================== .. contents:: :depth: 2 NAME ==== biboumi - XMPP gateway to IRC Description =========== Biboumi is an XMPP gateway that connects to IRC servers and translates between the two protocols. It can be used to access IRC channels using any XMPP client as if these channels were XMPP MUCs. Synopsis ======== biboumi [*config_filename*\ ] Options ======= Available command line options: config_filename --------------- Specify the file to read for configuration. See *CONFIG* section for more details on its content. Configuration ============= The configuration file uses a simple format of the form ``option=value``. Here is a description of each possible option: The configuration can be re-read at runtime (you can for example change the log level without having to restart biboumi) by sending SIGUSR1 or SIGUSR2 (see kill(1)) to the process. hostname -------- Mandatory. The hostname served by the XMPP gateway. This domain must be configured in the XMPP server as an external component. See the manual for your XMPP server for more information. For prosody, see http://prosody.im/doc/components#adding_an_external_component password -------- Mandatory. The password used to authenticate the XMPP component to your XMPP server. This password must be configured in the XMPP server, associated with the external component on *hostname*. xmpp_server_ip -------------- The IP address to connect to the XMPP server on. The connection to the XMPP server is unencrypted, so the biboumi instance and the server should normally be on the same host. The default value is 127.0.0.1. port ---- The TCP port to use to connect to the local XMPP component. The default value is 5347. admin ----- The bare JID of the gateway administrator. This JID will have more privileges than other standard users (the admin thus needs to check their privileges), for example some administration ad-hoc commands will only be available to that JID. fixed_irc_server ---------------- If this option contains the hostname of an IRC server (for example irc.example.org), then biboumi will enforce the connexion to that IRC server only. This means that a JID like "#chan@biboumi.example.com" must be used instead of "#chan%irc.example.org@biboumi.example.com". In that mode, the virtual channel (see `Connect to an IRC server`_) is not available. The '%' character loses any meaning in the JIDs. It can appear in the JID but will not be interpreted as a separator (thus the JID "#channel%hello@biboumi.example.com" points to the channel named "#channel%hello" on the configured IRC server) This option can for example be used by an administrator that just wants to let their users join their own IRC server using an XMPP client, while forbidding access to any other IRC server. realname_customization ---------------------- If this option is set to “false” (default is “true”), the users will not be able to use the ad-hoc commands that lets them configure their realname and username. realname_from_jid ----------------- If this option is set to “true”, the realname and username of each biboumi user will be extracted from their JID. The realname is their bare JID, and the username is the node-part of their JID. Note that if ``realname_customization`` is “true”, each user will still be able to customize their realname and username, this option just decides the default realname and username. If this option is set to “false” (the default value), the realname and username of each user will be set to the nick they used to connect to the IRC server. webirc_password --------------- Configure a password to be communicated to the IRC server, as part of the WEBIRC message (see https://kiwiirc.com/docs/webirc). If this option is set, an additional DNS resolution of the hostname of each XMPP server will be made when connecting to an IRC server. log_file -------- A filename into which logs are written. If none is provided, the logs are written on standard output. log_level --------- Indicate what type of log messages to write in the logs. Value can be from 0 to 3. 0 is debug, 1 is info, 2 is warning, 3 is error. The default is 0, but a more practical value for production use is 1. ca_file ------- Specifies which file should be use as the list of trusted CA when negociating a TLS session. By default this value is unset and biboumi tries a list of well-known paths. outgoing_bind ------------- An address (IPv4 or IPv6) to bind the outgoing sockets to. If no value is specified, it will use the one assigned by the operating system. You can for example use outgoing_bind=192.168.1.11 to force biboumi to use the interface with this address. Note that this is only used for connections to IRC servers. Usage ===== Biboumi acts as a server, it should be run as a daemon that lives in the background for as long as it is needed. Note that biboumi does not daemonize itself, this task should be done by your init system (SysVinit, systemd, upstart). When started, biboumi connects, without encryption (see `Security`_), to the local XMPP server on the port ``5347`` and authenticates with the provided password. Biboumi then serves the configured ``hostname``: this means that all XMPP stanza with a `to` JID on that domain will be forwarded to biboumi by the XMPP server, and biboumi will only send messages coming from that hostname. When a user joins an IRC channel on an IRC server (see `Join an IRC channel`_), biboumi connects to the remote IRC server, sets the user’s nick as requested, and then tries to join the specified channel. If the same user subsequently tries to connect to an other channel on the same server, the same IRC connection is used. If, however, an other user wants to join an IRC channel on that same IRC server, biboumi opens a new connection to that server. Biboumi connects once to each IRC server, for each user on it. Additionally, if one user is using more than one clients (with the same bare JID), they can join the same IRC channel (on the same server) behind one single nickname. Biboumi will forward all the messages (the channel ones and the private ones) and the presences to all the resources behind that nick. There is no need to have multiple nicknames and multiple connections to be able to take part in a conversation (or idle) in a channel from a mobile client while the desktop client is still connected, for example. To cleanly shutdown the component, send a SIGINT or SIGTERM signal to it. It will send messages to all connected IRC and XMPP servers to indicate a reason why the users are being disconnected. Biboumi exits when the end of communication is acknowledged by all IRC servers. If one or more IRC servers do not respond, biboumi will only exit if it receives the same signal again or if a 2 seconds delay has passed. Addressing ---------- IRC entities are represented by XMPP JIDs. The domain part of the JID is the domain served by biboumi (the part after the ``@``, biboumi.example.com in the examples), and the local part (the part before the ``@``) depends on the concerned entity. IRC channels and IRC users have a local part formed like this: ``name`` % ``irc_server``. ``name`` can be a channel name or an user nickname. The distinction between the two is based on the first character: by default, if the name starts with ``'#'`` or ``'&'`` (but this can be overridden by the server, using the ISUPPORT extension) then it’s a channel name, otherwise this is a nickname. As a special case, the channel name can also be empty (for example ``%irc.example.com``), in that case this represents the virtual channel provided by biboumi. See *Connect to an IRC server* for more details. There is two ways to address an IRC user, using a local part like this: ``nickname`` % ``irc_server`` or by using the in-room address of the participant, like this: ``channel_name`` % ``irc_server`` @ ``biboumi.example.com`` / ``Nickname`` The second JID is available only to be compatible with XMPP clients when the user wants to send a private message to the participant ``Nickname`` in the room ``channel_name%irc_server@biboumi.example.com``. On XMPP, the node part of the JID can only be lowercase. On the other hand, IRC nicknames are case-insensitive, this means that the nicknames toto, Toto, tOtO and TOTO all represent the same IRC user. This means you can talk to the user toto, and this will work. Also note that some IRC nicknames or channels may contain characters that are not allowed in the local part of a JID (for example '@'). If you need to send a message to a nick containing such a character, you can use a jid like ``%irc.example.com@biboumi.example.com/AnnoyingNickn@me``, because the JID ``AnnoyingNickn@me%irc.example.com@biboumi.example.com`` would not work. And if you need to address a channel that contains such invalid characters, you have to use `jid-escaping `_, and replace each of these characters with their escaped version, for example to join the channel ``#b@byfoot``, you need to use the following JID: ``#b\40byfoot%irc.example.com@biboumi.example.com``. Examples: * ``#foo%irc.example.com@biboumi.example.com`` is the #foo IRC channel, on the irc.example.com IRC server, and this is served by the biboumi instance on biboumi.example.com * ``toto%irc.example.com@biboumi.example.com`` is the IRC user named toto, or TotO, etc. * ``irc.example.com@biboumi.example.com`` is the IRC server irc.example.com. * ``%irc.example.com@biboumi.example.com`` is the virtual channel provided by biboumi, for the IRC server irc.example.com. Note: Some JIDs are valid but make no sense in the context of biboumi: * ``#test%@biboumi.example.com``, or any other JID that does not contain an IRC server is invalid. Any message to that kind of JID will trigger an error, or will be ignored. If compiled with Libidn, an IRC channel participant has a bare JID representing the “hostname” provided by the IRC server. This JID can only be used to set IRC modes (for example to ban a user based on its IP), or to identify user. It cannot be used to contact that user using biboumi. Join an IRC channel ------------------- To join an IRC channel ``#foo`` on the IRC server ``irc.example.com``, join the XMPP MUC ``#foo%irc.example.com@biboumi.example.com``. Connect to an IRC server ------------------------ The connection to the IRC server is automatically made when the user tries to join any channel on that IRC server. The connection is closed whenever the last channel on that server is left by the user. To be able to stay connected to an IRC server without having to be in a real IRC channel, biboumi provides a virtual channel on the jid ``%irc.example.com@biboumi.example.com``. For example if you want to join the channel ``#foo`` on the server ``irc.example.com``, but you need to authenticate to a bot of the server before you’re allowed to join it, you can first join the room ``%irc.example.com@biboumi.example.com`` (this will effectively connect you to the IRC server without joining any room), then send your authentication message to the user ``bot%irc.example.com@biboumi.example.com`` and finally join the room ``#foo%irc.example.com@biboumi.example.com``. Channel messages ---------------- On XMPP, unlike on IRC, the displayed order of the messages is the same for all participants of a MUC. Biboumi can not however provide this feature, as it cannot know whether the IRC server has received and forwarded the messages to other users. This means that the order of the messages displayed in your XMPP client may not be the same than the order on other IRC users’. History ------- Public channel messages are saved into archives, inside the database, unless the `record_history` option is set to false for that user `Ad-hoc commands`. Private messages (messages that are sent directly to a nickname, not a channel) are never stored in the database. When a channel is joined, biboumi sends the `max_history_length` messages found in the database as the MUC history. A channel history can be retrieved by using `Message archive management (MAM) `_ on the channel JID. The results can be filtered by start and end dates. For a given channel, each user has her or his own archive. The content of the archives are never shared, and thus a user can not use someone else’s archive to get the messages that they didn’t receive when they were offline. Although this feature would be very convenient, this would introduce a very important privacy issue: for example if a biboumi gateway is used by two users, by querying the archive one user would be able to know whether or not the other user was in a room at a given time. List channels ------------- You can list the IRC channels on a given IRC server by sending an XMPP disco items request on the IRC server JID. The number of channels on some servers is huge, and biboumi does not (yet) support result set management (XEP 0059) so the result stanza may be very big. Nicknames --------- On IRC, nicknames are server-wide. This means that one user only has one single nickname at one given time on all the channels of a server. This is different from XMPP where a user can have a different nick on each MUC, even if these MUCs are on the same server. This means that the nick you choose when joining your first IRC channel on a given IRC server will be your nickname in all other channels that you join on that same IRC server. If you explicitely change your nickname on one channel, your nickname will be changed on all channels on the same server as well. Joining a new channel with a different nick, however, will not change your nick. The provided nick will be ignored, in order to avoid changing your nick on the whole server by mistake. If you want to have a different nickname in the channel you’re going to join, you need to do it explicitly with the NICK command before joining the channel. Private messages ---------------- Private messages are handled differently on IRC and on XMPP. On IRC, you talk directly to one server-user: toto on the channel #foo is the same user as toto on the channel #bar (as long as these two channels are on the same IRC server). By default you will receive private messages from the “global” user (aka nickname%irc.example.com@biboumi.example.com), unless you previously sent a message to an in-room participant (something like \#test%irc.example.com@biboumi.example.com/nickname), in which case future messages from that same user will be received from that same “in-room” JID. Notices ------- Notices are received exactly like private messages. It is not possible to send a notice. Invitations ----------- Biboumi forwards the mediated invitations to the target nick. If the user wishes to invite the user “FooBar” into a room, they can invite one of the following “JIDs” (one of them is not a JID, actually): - foobar%anything@anything - anything@anything/FooBar - FooBar Note that the “anything” part are simply ignored because they have no meaning for the IRC server: we already know which IRC server is targeted using the JID of the target channel. Kicks and bans -------------- Kicks are transparently translated from one protocol to another. However banning an XMPP participant has no effect. To ban an user you need to set a mode +b on that user nick or host (see `IRC modes`_) and then kick it. Encoding -------- On XMPP, the encoding is always ``UTF-8``, whereas on IRC the encoding of each message can be anything. This means that biboumi has to convert everything coming from IRC into UTF-8 without knowing the encoding of the received messages. To do so, it checks if each message is UTF-8 valid, if not it tries to convert from ``iso_8859-1`` (because this appears to be the most common case, at least on the channels I visit) to ``UTF-8``. If that conversion fails at some point, a placeholder character ``'�'`` is inserted to indicate this decoding error. Messages are always sent in UTF-8 over IRC, no conversion is done in that direction. IRC modes --------- One feature that doesn’t exist on XMPP but does on IRC is the ``modes``. Although some of these modes have a correspondance in the XMPP world (for example the ``+o`` mode on a user corresponds to the ``moderator`` role in XMPP), it is impossible to map all these modes to an XMPP feature. To circumvent this problem, biboumi provides a raw notification when modes are changed, and lets the user change the modes directly. To change modes, simply send a message starting with “``/mode``” followed by the modes and the arguments you want to send to the IRC server. For example “/mode +aho louiz”. Note that your XMPP client may interprete messages begining with “/” like a command. To actually send a message starting with a slash, you may need to start your message with “//mode” or “/say /mode”, depending on your client. When a mode is changed, the user is notified by a message coming from the MUC bare JID, looking like “Mode #foo [+ov] [toto tutu]”. In addition, if the mode change can be translated to an XMPP feature, the user will be notified of this XMPP event as well. For example if a mode “+o toto” is received, then toto’s role will be changed to moderator. The mapping between IRC modes and XMPP features is as follow: ``+q`` Sets the participant’s role to ``moderator`` and its affiliation to ``owner``. ``+a`` Sets the participant’s role to ``moderator`` and its affiliation to ``owner``. ``+o`` Sets the participant’s role to ``moderator`` and its affiliation to ``admin``. ``+h`` Sets the participant’s role to ``moderator`` and its affiliation to ``member``. ``+v`` Sets the participant’s role to ``participant`` and its affiliation to ``member``. Similarly, when a biboumi user changes some participant's affiliation or role, biboumi translates that in an IRC mode change. Affiliation set to ``none`` Sets mode to -vhoaq Affiliation set to ``member`` Sets mode to +v-hoaq Role set to ``moderator`` Sets mode to +h-oaq Affiliation set to ``admin`` Sets mode to +o-aq Affiliation set to ``owner`` Sets mode to +a-q Ad-hoc commands --------------- Biboumi supports a few ad-hoc commands, as described in the XEP 0050. Different ad-hoc commands are available for each JID type. On the gateway itself (e.g on the JID biboumi.example.com): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - ping: Just respond “pong” - hello: Provide a form, where the user enters their name, and biboumi responds with a nice greeting. - disconnect-user: Only available to the administrator. The user provides a list of JIDs, and a quit message. All the selected users are disconnected from all the IRC servers to which they were connected, using the provided quit message. Sending SIGINT to biboumi is equivalent to using this command by selecting all the connected JIDs and using the “Gateway shutdown” quit message, except that biboumi does not exit when using this ad-hoc command. - disconnect-from-irc-servers: Disconnect a single user from one or more IRC server. The user is immediately disconnected by closing the socket, no message is sent to the IRC server, but the user is of course notified with an XMPP message. The administrator can disconnect any user, while the other users can only disconnect themselves. On a server JID (e.g on the JID chat.freenode.org@biboumi.example.com) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Configure: Lets each user configure some options that applies to the concerned IRC server. On a channel JID (e.g on the JID #test%chat.freenode.org@biboumi.example.com) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Configure: Lets each user configure some options that applies to the concerned IRC channel. Some of these options, if not configured for a specific channel, defaults to the value configured at the IRC server level. For example the encoding can be specified for both the channel and the server. If an encoding is not specified for a channel, the encoding configured in the server applies. Raw IRC messages ---------------- Biboumi tries to support as many IRC features as possible, but doesn’t handle everything yet (or ever). In order to let the user send any arbitrary IRC message, biboumi forwards any XMPP message received on an IRC Server JID (see *ADDRESSING*) as a raw command to that IRC server. For example, to WHOIS the user Foo on the server irc.example.com, a user can send the message “WHOIS Foo” to “irc.example.com@biboumi.example.com”. The message will be forwarded as is, without any modification appart from adding "\r\n" at the end (to make it a valid IRC message). You need to have a little bit of understanding of the IRC protocol to use this feature. Security ======== The connection to the XMPP server can only be made on localhost. The XMPP server is not supposed to accept non-local connections from components. Thus, encryption is not used to connect to the local XMPP server because it is useless. If compiled with the Botan library, biboumi can use TLS when communicating with the IRC serveres. It will first try ports 6697 and 6670 and use TLS if it succeeds, if connection fails on both these ports, the connection is established on port 6667 without any encryption. Biboumi does not check if the received JIDs are properly formatted using nodeprep. This must be done by the XMPP server to which biboumi is directly connected. Note if you use a biboumi that you have no control on: remember that the administrator of the gateway you use is able to view all your IRC conversations, whether you’re using encryption or not. This is exactly as if you were running your IRC client on someone else’s server. Only use biboumi if you trust its administrator (or, better, if you are the administrator) or if you don’t intend to have any private conversation. Biboumi does not provide a way to ban users from connecting to it, has no protection against flood or any sort of abuse that your users may cause on the IRC servers. Some XMPP server however offer the possibility to restrict what JID can access a gateway. Use that feature if you wish to grant access to your biboumi instance only to a list of trusted users.